Category Archives: Trade Vehicles

  • -

How to Buy Personal Protective Equipment

Category : Trade Vehicles

Safety Shop Brisbane


Inside of a safety shop in Queensland

Are you looking to buy personal protective equipment in Brisbane? You are at the right place. It’s important that you buy the very best PPE clothing because your safety is of utmost importance. Just make sure to keep the following things in mind when shopping for PPE gear.

Get to know all the rules regarding PPE gear

The rules and regulation for PPE gear for different professions is something you have got to keep in mind. These rules and regulations provide a basic guide to how and what kind of safety equipment you should purchase. There are also a few firms which advice companies on choosing the right gear for their professional needs.

Take a Job hazard assessment

Not all hazardous jobs have the same requirements. This is why you must take a job hazard assessment to rule out any discrepancies. The assessment would help you understand the potential hazards you might face on the job. Knowing these minute details is important for your safety. This in turn provide you with the necessary guidance which you need while purchasing PPE gear from safety shops in Brisbane.

Buy safety equipment from a well-known supplier

There are loads of suppliers who claim that they have the best quality personal protection equipment. So how do you know you are choosing the right person to buy the gear from? It’s simple. You just need to do a bit of research. Check out the testimonials on their website. These are often true and offer you better insight regarding the personal experience of each person who purchased the safety gear.

Another thing you could do is to check out the gear on your own. Whether it’s sturdy enough to withstand the extreme condition the workers need to be in?

Choose high quality gear which is simple to use

Whenever purchasing PPE, you need to make sure that you only choose the very best. Most people decide to buy second hand stuff. However it should be considered as a onetime investment. After all you would be purchasing safety gear again and again. Therefore it’s wise to invest in PPE which is high quality and simple to use. Anything which is too specific or complicated would only serve to increase the risk of potential hazard a work.

Just make sure that it offers you maximum protection. The fewer compliance issues the more safe would be the work environment.

Training employees

It’s necessary that once you have purchased the gear from a safety shop in Brisbane, you educate your employees to use it the right way. There should be a few customized training sessions for all employees who would be using the PPE.

All the above mentioned things are pretty necessary if you want to make sure that your work place is as safe as possible. Being proactive with all these is the key to a more productive work environment. Are you searching for the best safety shop in Brisbane then look no further, make sure you contact these guys for all your safety needs.

 


  • -

Excavator Tracks

Category : Trade Vehicles

Tracked excavators come in different models depending on the need. They are often referred to as “trackhoes” as an analogy of the backhoe. Diggers or excavators are used for a myriad of large projects outdoors. They can complete tasks such as:

  • Digging of trenches, holes, foundations
  • Forestry mulching
  • Forestry work
  • Material handling
  • Brush cutting with hydraulic attachments
  • General grading/landscaping
  • Construction
  • River dredging
  • Mining, especially, but not only open-pit mining
  • Drilling shafts for footings and rock blasting, by use of an auger or hydraulic drill attachment
  • Driving piles, in conjunction with a pile driver
  • Snow removal with snowplow and snowblower attachments

Excavator tracks are made of 5 main parts.

  1. Sprocket
  2. Front Idler
  3. Top Roller
  4. Lower Roller
  5. Track Chain

When these parts all work together they allow the vehicle to travel on rough ground to complete its job. Here are some things to keep in mind about your excavator track.

Excavator Tracks

  • Track sag and track tension affect wear

One crucial factor you can control in undercarriage wear is

your track-chain adjustment. The right track sag for every conventional

crawler is two inches (± 1⁄4 inch). Tight tracks have been known to increase

wear as much as up to 50 percent.

  • Track shoe width makes a difference

Select the narrowest track shoes possible — make sure they

give you the flotation you need. A wider than necessary shoe width increases

stress and load on idlers, rollers, and sprockets.

  • Undercarriages can be affected by how the machine is operated

component wear

By using intelligent operating procedures, you can extend the life

of the undercarriage.

> Limit nonproductive, high-speed travel

> Limit reverse operation

  • Use rock guards selectively

Full-length rock guards are not required under normal working conditions.

Keeping these things in mind can improve the longevity of your tracks, saving you money and time.If your track needs to be repaired or replaced you can easily find parts online or at your tractor dealer. If you know the make and model of your excavator, the type of track you have, and the size, you can easily purchase the track and repair it yourself without the need for a garage. Other ways to improve the longevity of your excavator track are in general maintenance.

  • Keep the undercarriage clean

Dirt and debris can exacerbate the normal wear on your track and decrease your fuel economy.

  • Routinely check for wear

It’s important to keep up-to-date on the condition of your track. Small breaks or parts that may have some wear can create big problems later on if they aren’t properly taken care of.

  • While driving, use movements that are easy on your track

Things, like making wider turns, minimizing your time on hills, avoiding harsh conditions, and choosing the proper shoe width, can all reduce the wear on your track.

  • Use the right track tension

If it is too loose or too tight you can wear your track down much quicker. Tight tracks increase the load weight and loose tracks may come off of the rollers.

  • Always follow directions

Read the manual to make sure you are using the machine correctly. Talk to your dealer about how to take care of and use your excavator track.

Excavator tracks are used commonly to do a lot of heavy digging. The tracks they run on make the vehicle able to travel on bumpy or extra soft ground without sinking. It is important to maintain your tracks and keep them in perfect condition. If you follow this guide, you’re sure to improve the longevity of your excavator tracks.


  • -

Fleet Trade Vehicles

Category : Trade Vehicles

Buying Tips


Buying fleet vehicles is a major investment. This is why most companies seek to buy cars, trucks and automobiles which can give them the best value for their money. The following are a few tips which can help you purchase the right fleet trade vehicles.

fleet trade vehicles

Keeping your options open

When it comes to purchasing fleet trade vehicles, make sure, you keep an open mind. Though it is important to keep things like specifications in mind, you shouldn’t be too rigid. Instead of focusing on the brand consider why and when the vehicles would be used. Also be willing to consider other options if you can’t seem to get the exact specifications which you have in mind. Flexibility is the key to making a great purchase.

Get to know the fleet sale representatives

Instead of purchasing the vehicles from any dealer, make sure you have a detailed talk with a fleet sales representative. Since these are people looking to sell vehicles in bulk, they will provide you with better options and deals as well. The margin of profit per vehicle is small but the fact that they are selling in bulk would benefit both your company and the sales representative as well.

A test drive is necessary

All fleet vehicles which you plan to purchase must be taken for a test drive. This means that you should take along the riders or the drivers working in the company and offer them an option of testing those vehicles first hand. This way they can get a fairly good idea regarding how a particular vehicle work. Whether it makes for a comfortable ride or has the potential to carry your huge amount of paraphernalia. Comfort and safety for your employees should be the first thing which should be kept in mind when purchasing fleet trade vehicles.

The best pricing

Once you have decided upon the kind of vehicles which you plan to purchase, it’s time to get a quote on the bulk order. This would mean keeping your options open, talking to at least two or three dealers and then deciding on the best option which is well within your company’s budget.

Don’t just agree to the first quote you receive, you can always try to cinch a better deal by having a talk with the sales representative.

Getting to know the incentives and discounts

Most companies are willing to offer great incentives and discounts if you purchase a certain number of vehicles from them. In fact businesses can save up to thousands of dollars in business simply by getting a discount on the number of vehicles they purchase. While most care companies offer discounts if you purchase at least five vehicles from them. The discount and bonus often keeps on increasing with the number of vehicles that you purchase.

Buying fleet trade vehicles can be pretty hassle free if you follow the above mentioned tips. Just make sure to keep the options open, getting to know the sales rep and asking for discounts.

When looking at all options regarding fleet trade vehicles, make sure you contact an authorised representative