Working at Height Solutions
Category : Safety Equipment
Personal Safety Equipment
In the construction business, falls are considered the number one reason of deaths. According to the bureau of labor statistics thirty six percent of the deaths were caused by falling off from a height. Fall protection is the number one concern of health and safety organizations across different countries. It is therefore equally important that when you are working at a height you need to use the right personal safety equipment.
The hazards of working at a height can be reduced by using the right kind of fall protection system and combining it with the right kind of training for the employees. This kind of training session can be in the form of a workshop where workers are taught the proper use of equipment to make them as safe as possible.
So what exactly is personal protection equipment?
Personal protection equipment refers to the gear which is worn to protect a particular person from hazardous instances which could compromise their safety. Fall protection equipment helps safeguard a person by protecting them to reduce instances of a fall. Anchor points though not worn are considered a part of the fall safety equipment. People wearing the personal protection gear must have the right kind of knowledge which helps them to wear the gear in a way which offers them maximum satisfaction. This equipment is essential for working at height solutions on the work site.
Kind of fall protection equipment
There are actually three types of fall protection equipment which can be used by individuals for their personal safety. These include the following
- Travel restraint fall protection system. This is considered as one of the most restrictive fall protection system. The major concern is to prevent a fall at all costs. It is connected to the worker and this prevents the worker from moving towards the edge. Since there is absolutely no risk of fall there is also no need to make use of shock absorbers o energy absorbers.
- Positioning fall protection systems allow a worker to be suspended with the help of the right kind of equipment. The workers are attached with a cable or a wire which allows them free movement across a ladder but which can actually prevent them from falling off altogether. It can easily help prevent a fall under twenty four inches, all the while allowing a worker to work in a hands free mode.
- Personal fall arrest systems. This kind of system makes use of a full body harness and a certain connecting device which include shock absorbing lanyards. The usual limit for a free fall is six feet and less. This is the least restrictive form of personal protection equipment.
Deciding which of these equipment’s is right for you can only be determined by attending a workshop and talking to a safety expert. Failure to use the correct equipment increases the risk of a fall. Be smart and make sure to use the right fall protection equipment.
For more information on personal fall protection systems, make sure you check out the equipment available at online stores.